dmesg - ketphago-01 test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-38-generic (buildd@lgw01-58) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016 (Ubuntu 4.4.0-38.57-generic 4.4.19)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008678bfff] usable
BIOS-e820: [mem 0x000000008678c000-0x000000008678cfff] ACPI NVS
BIOS-e820: [mem 0x000000008678d000-0x00000000867d6fff] reserved
BIOS-e820: [mem 0x00000000867d7000-0x000000008682efff] usable
BIOS-e820: [mem 0x000000008682f000-0x0000000086d1ffff] reserved
BIOS-e820: [mem 0x0000000086d20000-0x0000000086d35fff] usable
BIOS-e820: [mem 0x0000000086d36000-0x0000000086da8fff] type 20
BIOS-e820: [mem 0x0000000086da9000-0x00000000879cbfff] reserved
BIOS-e820: [mem 0x00000000879cc000-0x0000000087f99fff] ACPI NVS
BIOS-e820: [mem 0x0000000087f9a000-0x0000000087fccfff] ACPI data
BIOS-e820: [mem 0x0000000087fcd000-0x0000000087ffffff] usable
BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000fffffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x875c6018 ACPI=0x87f1e000 ACPI 2.0=0x87f1e000 SMBIOS=0xf05e0 MPS=0xfc960
esrt: Reserving ESRT space from 0x00000000875c6018 to 0x00000000875c6050.
SMBIOS 2.8 present.
DMI: Gigabyte Technology Co., Ltd. H170-Gaming 3/H170-Gaming 3, BIOS F5 03/14/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1000000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008A000000 mask 7FFE000000 uncachable
5 base 0089000000 mask 7FFF000000 uncachable
6 base 0088800000 mask 7FFF800000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x88000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcbf0-0x000fcbff] mapped at [ffff8800000fcbf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x03201000, 0x03201fff] PGTABLE
BRK [0x03202000, 0x03202fff] PGTABLE
BRK [0x03203000, 0x03203fff] PGTABLE
BRK [0x03204000, 0x03204fff] PGTABLE
BRK [0x03205000, 0x03205fff] PGTABLE
BRK [0x03206000, 0x03206fff] PGTABLE
RAMDISK: [mem 0x338fc000-0x35c75fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000087F1E000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000087F1E0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000087F40CA0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000087F1E208 022A95 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000087F99F80 000040
ACPI: APIC 0x0000000087F40DB0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000087F40E70 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000087F40EB8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000087F40F58 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000087F40F98 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000087F40FD0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: SSDT 0x0000000087F41340 000490 (v02 Intel PerfTune 00001000 INTL 20120913)
ACPI: LPIT 0x0000000087F417D0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087F41868 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x0000000087F41AB0 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x0000000087F44660 000C45 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x0000000087F452A8 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000087F452E0 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000087F45338 002103 (v02 INTEL xh_rvp10 00000000 INTL 20120913)
ACPI: SSDT 0x0000000087F47440 005384 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000087F4C7C8 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: SSDT 0x0000000087F4C810 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: BGRT 0x0000000087F4D668 000038 (v01 ALASKA ALASKAA 01072009 AMI 00010013)
ACPI: DMAR 0x0000000087F4D6A0 000070 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x0000000087F4D710 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000fffffffff]
NODE_DATA(0) allocated [mem 0xfffff9000-0xfffffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000fffffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000008678bfff]
node 0: [mem 0x00000000867d7000-0x000000008682efff]
node 0: [mem 0x0000000086d20000-0x0000000086d35fff]
node 0: [mem 0x0000000087fcd000-0x0000000087ffffff]
node 0: [mem 0x0000000100000000-0x0000000fffffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000fffffffff]
On node 0 totalpages: 16279498
DMA zone: 64 pages used for memmap
DMA zone: 28 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8545 pages used for memmap
DMA32 zone: 546861 pages, LIFO batch:31
Normal zone: 245760 pages used for memmap
Normal zone: 15728640 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8678c000-0x8678cfff]
PM: Registered nosave memory: [mem 0x8678d000-0x867d6fff]
PM: Registered nosave memory: [mem 0x8682f000-0x86d1ffff]
PM: Registered nosave memory: [mem 0x86d36000-0x86da8fff]
PM: Registered nosave memory: [mem 0x86da9000-0x879cbfff]
PM: Registered nosave memory: [mem 0x879cc000-0x87f99fff]
PM: Registered nosave memory: [mem 0x87f9a000-0x87fccfff]
PM: Registered nosave memory: [mem 0x88000000-0x880fffff]
PM: Registered nosave memory: [mem 0x88100000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x88100000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880fffc00000 s98008 r8192 d28968 u262144
pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16025101
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 63922416K/65117992K available (8404K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 1195576K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3407.955 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6815.91 BogoMIPS (lpj=13631820)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
ftrace: allocating 32006 entries in 126 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000087906000 end: 0x00000087925fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54527.28 BogoMIPS)
devtmpfs: initialized
memory block size : 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x8678c000-0x8678cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x879cc000-0x87f99fff] (6086656 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 6:40:23, date: 10/06/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 23 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880FBAB62000 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880FBA070800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880FBA5D0800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880FBA064000 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x89800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a169] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:a112] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.4: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a144] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1b80] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1b21:1080] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: PCI bridge to [bus 02-03]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1969:e091] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdf200000-0xdf23ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:07:00.0: [144d:a802] type 00 class 0x010802
pci 0000:07:00.0: reg 0x10: [mem 0xdf110000-0xdf113fff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:07:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
acpiphp: Slot [1] registered
pci 0000:00:1d.4: PCI bridge to [bus 08]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8678c000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8682f000-0x87ffffff]
e820: reserve RAM buffer [mem 0x86d36000-0x87ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1b.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1d.0: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.4: PCI bridge to [bus 08]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x89800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
pci 0000:05:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36328K (ffff8800338fc000 - ffff880035c76000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7f22e000-0x8322e000] (64MB) mapped at [ffff88007f22e000-ffff88008322dfff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1475736023.636:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xd1000000, mapped to 0xffffc90006a00000, using 1920k, total 1920k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-38-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x74
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8b9fe5db9540517005e475afed63f7a6645227d6'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:242:670
rtc_cmos 00:04: setting system clock to 2016-10-06 06:40:24 UTC (1475736024)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1824K (ffff880002838000 - ffff880002a00000)
Freeing unused kernel memory: 152K (ffff880002dda000 - ffff880002e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
[drm] Initialized drm 1.1.0 20060810
alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:11:dc:92]
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
nouveau 0000:01:00.0: unknown chipset (134000a1)
nouveau: probe of 0000:01:00.0 failed with error -12
alx 0000:05:00.0 enp5s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 123
ata2: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b180 irq 123
ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 123
ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 123
ata5: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b300 irq 123
ata6: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b380 irq 123
nvme0n1: p1 p2 p3
ata3: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: ST1000DM003-1SB102, CC43, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1SB1 CC43 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sda] 4096-byte physical blocks
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg0 type 0
ata6: SATA link down (SStatus 4 SControl 300)
sd 4:0:0:0: [sda] Attached SCSI disk
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Set console keymap.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[267]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
random: nonblocking pool is initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 367.48 Sat Sep 3 18:21:08 PDT 2016
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.48 Sat Sep 3 17:45:40 PDT 2016
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
tsc: Refined TSC clocksource calibration: 3408.004 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd7ed0ff, max_idle_ns: 440795285512 ns
snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
Adding 65117180k swap on /dev/nvme0n1p3. Priority:-1 extents:1 across:65117180k SSFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
audit: type=1400 audit(1475736025.540:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=668 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=664 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=664 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=670 comm="apparmor_parser"
audit: type=1400 audit(1475736025.540:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=663 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
clocksource: Switched to clocksource tsc
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
alx 0000:05:00.0 enp5s0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
nvidia-modeset: Allocated GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
perf interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
nvidia-modeset: Allocated GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
nvidia-modeset: Allocated GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
nvidia-modeset: Freed GPU:0 (GPU-2c22d075-18db-e0b4-dba0-47fe239a8ab7) @ PCI:0000:01:00.0
perf interrupt took too long (5001 > 5000), lowering kernel.perf_event_max_sample_rate to 25000